济南不锈钢制品加工的工艺指标

　　瑞泉济南不锈钢金属制品在进行加工的过程当中，为了确保加工的品质都是会借助技术人才积累的经验来作出判断，在其中危害生产加工品质的要素还是有很多的，在加工过程中有一定的留意，下边让我们一起来盘点一下吧。

　　During the processing of stainless steel metal products in Ruiquan Jinan, in order to ensure the quality of the processing, we rely on the experience accumulated by technical personnel to make judgments. There are still many factors that endanger the production and processing quality, and there is a certain amount of attention during the processing. Let's take a look together.

　　1，技术师傅需要通过特定的激光功率密度各种材料，切削用量合乎经验公式定律。只需切割速度高过根据阀值，原材料的切割速度与激光功率密度正相关，换句话说，提升功率能提高切割速度。

　　1. Technicians need to use specific laser power densities for various materials, and the cutting amount should comply with the laws of empirical formulas. As long as the cutting speed exceeds the threshold, the cutting speed of the raw material is positively correlated with the laser power density. In other words, increasing the power can improve the cutting speed.

　　2，这里我们所称的功率除了与激光器功率相关，还和光束质量方式相关。此外，光线对焦系统的特点，即对焦后光点大小对激光切割也有很大影响。切割速度和被激光切割原材料密度(比例)和壁厚反比。

　　2. The power we refer to here is not only related to the laser power, but also to the beam quality mode. In addition, the characteristics of the light focusing system, namely the size of the light spot after focusing, also have a significant impact on laser cutting. The cutting speed is inversely proportional to the density (proportion) and wall thickness of the raw material being laser cut.

　　3，激光切割中当其他主要参数不会改变时，提升切削用量的影响因素有：提升输出功率(在一定范围内，如500-2000W);改进光线方式;减少聚焦点尺寸(如用短镜头焦距镜片对焦);激光切割原始挥发能量低的原材料(如塑胶、有机玻璃板等);激光切割相对密度相对较低的原材料(如白松等);激光切割薄原材料。

　　3. When other main parameters do not change in laser cutting, the influencing factors for increasing cutting amount include: increasing output power (within a certain range, such as 500-2000W); Improve lighting methods; Reduce the size of the focal point (such as focusing with a short lens focal length lens); Laser cutting of raw materials with low original volatile energy (such as plastic, organic glass board, etc.); Laser cutting of raw materials with relatively low relative density (such as white pine); Laser cutting of thin raw materials.

　　总的来说，济南不锈钢制品加工中，当别的工艺指标不会改变时，激光切割速率能够有一个相对可调式的范畴，而且依然保持相对性令人满意的激光切割品质，如果你想当面看一下不妨来我们瑞泉不锈钢了解一下吧。